WJBS-701 alkali resistant reinforced inorganic base coating

Product selection of high quality inorganic raw materials, strong alkali resistance, can effectively close and strengthen the base material, deep protection of the wall, and let the face paint brushing effect more fullness. It is a high-quality product with both environmental protection and function, and it is the companion of inorganic coating products.

Product characteristics

· Reinforced closed base with strong alkali and mildew resistance

· Lift the adhesion of the surface to avoid peeling and falling of the paint film

· Improve the covering power, fullness and evenness of the topcoat

Construction procedure

Construction method: brush coating, roll coating, airless spraying

Theoretical coating amount: 8-12 square meters /kg (single times) due to the actual construction surface roughness and dilution ratio of different, the amount of paint consumption is also different

Dilution: before use should be stirred evenly, in order to achieve the best brushing effect, roller coating, brush coating can usually be added to the paint 10%-15% volume of water according to the actual situation, at most 15% volume of water dilution this product. After mixing well, let it stand for 5 minutes before construction. If airless spraying is used, water dilution of no more than 5% of the volume of the paint can be used according to the actual situation, and stir evenly

Construction conditions: temperature > 5℃, humidity < 85%

Storage: Store in a cool, clean and dry place at 5-35℃. The remaining paint should be sealed and covered to prevent impurities from deteriorating paint. If the product is not opened and properly stored, the storage period is 12 months.